NTCAPIPE3C9 www.vishay.com vishay bccomponents revision: 24-mar-17 1 document number: 29166 for technical questions, contact: nlr@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ntc thermistors, special long lead sensors note (1) response time in silicone oil ms 200/50. this is the time needed for the sensor to reach 63.2 % of the total temperature difference when subjected to a temperature change from 25 c in air to 85 c in oil features ? accurate over wide temperature range ? high stability ? excellent price / performance ratio ? high adhesive strength between pvc wire and the encapsulating lacquer ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 applications temperature measurement, sensing and control in remote locations and for various environmental conditions. description these sensors exist of a small ntc chip reflow soldered between two awg24 ul-2651 105 c rating 300 v wires. they are lacquered and insu lated and potted into a brass pipe. marking ul mark on wire, no mark on body. packaging the thermistors are packed in cardboard boxes; each box containing 500 pieces. design-in support ? for complete curve computation, visit: ? www.vishay.com/thermistors/ntc-curve-list/ ? other wire length and wire ty pe are available on request. the products can be provided with a connector on request with a minimum buy constraint. mounting by soldering or clamping the wire ends, in any position. body can be inserted or tape d attached. not intended for fluid immersed applications. note ? l: refer to table. quick reference data parameter value unit resistance value at 25 c 10k ? tolerance on r 25 -value 3 % b 25/85 -value 3984 k tolerance on b 25/85 -value 0.5 % dissipation factor: 6.0 mw/k response time (1) : ? 10 s operating temperature range: c at zero dissipation (continuously) -40 to +105 min. dielectric withstanding voltage 500 v ac weight 25 g electrical data and ordering information r 25 ( ? ) r 25 -tol. ( %) b 25/85 (k) b 25/85 -tol. ( %) lead length (mm) sap material and ordering number 10 000 3 3984 0.5 1500 20 NTCAPIPE3C90105 dimensions in millimeters brass-pipe type 6 0.1 25 0.5 l 5 2
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
